|Discharge Capacity:||1000 Liters||Keyword:||JS1000 Concrete Mixer Machine|
|Mixing Drum Speed:||25rpm||Feed Capacity:||1600L|
|Productivity:||40-50m3/h||Aggregate Large Particle Size:||80mm|
construction mixer machine,
mixer batching plant
High Efficient JS1000 concrete mixer
JS1000 concrete mixer product parameters
Discharge capacity: 1000 liters
Mixing drum speed: 25 rpm
Feed capacity: 1600 liters
Aggregate large particle size: 80mm
Stirring motor power: 18.5kwx2
Increase motor power: 11 kW
Water supply accuracy: error ≤ 2%
②,the performance advantages of JS1000 concrete mixer
1. High Efficient
The mixing blade is more than twice as much as the ordinary twin shaft mixer. The outer ring spiral belt pushes the material to form a boiling flow in the barrel, and the inner ring shovel is radially sheared. The combination of the two is achieved in a short time. And full mixing. After the inspection and appraisal by the National Construction City Construction Machinery Quality Supervision and Inspection Center: For ordinary concrete, the mixing time can reach the homogenization state in only 20 seconds, which is more than 20% higher than the actual efficiency of the ordinary mixer; for high performance concrete, the mixing time is only 35 Seconds, the actual efficiency of the ordinary mixer is increased by more than 50%.
2. Energy saving
At the cost of large space, low volume utilization design, spacious space makes mixing easier; outer ring spiral blades continuously push the material to form a high speed circulation, low impact load, low energy consumption; after strict comparison test, compared with traditional mixing host High energy saving of more than 15%.
The blade is made of high chromium alloy wear resistant cast iron, and the perfect agitation device improves the flow, reduces the friction and impact of the sand and gravel on the blade, and the service life can exceed 60,000 cans.
The lining plate adopts a trapezoidal design, and the service life can exceed 70,000 cans under the premise of maintenance and adjustment according to the specifications.
③, JS1000 concrete mixer product introduction
JS1000 concrete mixer. The station mixing machine and aggregate lifting adopt JS750 twin shaft forced mixer, the aggregate ingredient part adopts PLD1200 concrete batching machine, loader loading, electronic scale measurement; storage by cement silo, screw conveyor conveying, cement scale measurement The water is stored by the water tank and the reservoir, the water pump is supplied, and the water scale is metered. After the liquid admixture is evenly stirred in the admixture storage tank, it is sent to the admixture scale by the corrosion resistant pump for metering. The whole process of batching and mixing is automatically completed by the electronic control system (also can be manually controlled), and the control system can store a plurality of different concrete proportions for the user to call at any time. The station has a simple structure, convenient installation and debugging, advanced system configuration, imported components for the metering and control system, and high operational reliability.
HZS series concrete mixing equipment adopts double shaft forced mixing host. Controlled by industrial computer, electronic scale measurement, it has high measurement accuracy and small error. With screen display, ratio storage, dynamic zero tracking, automatic offset compensation, production management, physical consumption and statistics, printing and monitoring functions, manual and automatic control of the mixing process can be realized. The utility model has the advantages of reasonable structural design, safe and reliable operation, good quality of mixing concrete, fast speed measurement and the like. It is an ideal choice for construction, hydropower, highways, ports, bridges, airports, prefabricated plants and commercial concrete production plants.
The geometric volume of the Jinteng Group 1000 mixer cylinder is determined by the working volume. It is mainly considered whether there is enough space to stir the concrete equivalent to the working volume. According to the experience of use, the statistical value of some foreign materials is the mixing capacity. About 75% of the volume. The barrel is composed of a cylinder and a rectangular parallele piped end cover. The height of the cylinder is determined by the working volume and the position on the frame. At the outlet of the barrel, a properly sized discharge port is arranged so that Fully fast discharge.
When the 1000 mixer produces concrete, the impact on the quality of the concrete is greater than the performance of the mixer itself, which is the water supply accuracy. Since the accuracy of water supply is controlled within 2%, how to better meet the accuracy problem is the choice of water supply method.
At present, the main pump for the main concrete mixer used in China is equipped with time relay control, which makes the water supply time slightly larger within the error tolerance. If the sand is too wet, the water supply time is relatively short.
④, JS1000 concrete mixer new machine use operation matters
Before the new machine is used, the empty car running test operation must be carried out according to the instructions to ensure that all parts are in normal operation;
Before each operation, it is necessary to check whether each component is damaged, and repair it in time after the damage is found;
The machine also needs to pay attention to the inspection regularly, and the power must be cut off during the inspection;
When the machine is working, it is strictly forbidden to repair and maintain; to ensure the cleanliness of the body,
It must be cleaned after each use, so the life of the machine will be long;
After the machine is started, the driver must concentrate and not leave the post without permission.
Contact Person: Karen