|Theoretical Productivity:||180m3/h||Future:||High Weighing Accuracy|
|Mixer Model:||JS3000||Batching Capacity:||180m3|
|Batching Machine:||PLD4800||Bin Number:||4 Grids|
compact concrete batching plant,
wet batch concrete plant
①, HZS180 concrete mixing plant product introduction
The theoretical productivity of HZS180 concrete mixing plant is 180m3/h, the mixer model is JS3000 forced concrete mixer, the batching machine is PLD4800, the bin number is 4 grids, the batching capacity is 180m3, the discharge height is 4m, and it can be transported to higher with the screw conveyor pump.
The HZS180 station consists of two rows of cement silos and a series of screw conveyors. The operation of the entire concrete mixing plant is controlled by a microcomputer control room side. The mixing materials can be delivered to two concrete transport vehicles at the same time. Also adopting the latest design ideas of electronic weighing, microcomputer control, digital display and other control technologies, electronic weighing has a buffer device and automatic compensation function, high measurement accuracy. The gravel loading system adopts large width herringbone belt feeding, and can set up pedestrian security inspection aisles according to requirements. The roof is equipped with large capacity sand and stone storage silos. The whole concrete production is in a fully enclosed environment from metering to mixing and discharging. , outstanding performance in green environmental protection.
Many advantages make the HZS series 180 mixing station an ideal choice for commercial concrete mixing plant enterprises and the most demanding high quality concrete mixing equipment.
②, HZS180 concrete mixing plant equipment advantages
1. high quality mixing performance
The mixing machine adopts the double shaft forced type, which has the characteristics of short stirring time, quick discharging, uniform mixing and high productivity. It can achieve good mixing effect for dry hard, plastic and various proportions of concrete. The mixer liner and the mixing blade are specially treated with wear-resistant materials. The unique shaft end support and sealing type greatly improve the service life of the main machine.
2. Advanced and reliable electrical control system
The whole machine is controlled by computer and PLC. It can be controlled automatically or manually. It is easy to operate and master.
3. dynamic panel display
It can clearly understand the operation of each component, but also can store the ratio, output and other data, and can output print statistics table, with powerful management functions. The friendly man machine dialogue function provides strong support for on site management and monitoring.
4. error automatic compensation function
5. automatically complete the scheduled filling production
③, HZS180 concrete mixing plant main futures
(1) High production efficiency
(The actual production of concrete produced by standard conditions: 90-120 cubic meters for 120 stations, 135-180 cubic meters for 180 stations, and 180-240 cubic meters for 240 stations)
1. The aggregate is automatically sorted and discharged in the control, and the delay time of the aggregate is not selected during the unloading process. It can save 3 to 5 seconds of mixing time.
2. The water bucket is equipped with a water bucket to save the water discharge time. The admixture adopts the first name first discharge function, which can reduce the discharge time of the admixture, so that the admixture can fully accommodate the water, effectively improve the productivity and the quality of the concrete.
3. material discharge using convergence technology, can save mixing time 2 to 3 seconds
(2) High weighing accuracy
1. The 10 sets of data values of the sensor are called when the door is closed, and the average value is close to the true value (the aggregate error is within 1%, and the powder error is within 0.5%).
2. Automatic dynamic correction function of the advance amount of the arc door, and the automatic deduction function of the weighing system;
3. accurate measurement system of powder - negative pressure return air device.
4. Each scale has a coarse and fine function.
(3) Advanced mixer anti-lock shaft technology
1. High pressure water curtain: There are two inlet pipes above the mixer, and each inlet pipe is opened with three rows of holes, one of which is aligned with the mixer main shaft, and the other two holes are pressed with dust at a 20-degree angle;
2. Accurate calculation of the position of the material mixing hopper. The special design of the aggregate angle of the aggregate and the powder into the mixer (200mm×500mm long opening at the opening) allows the material to be thrown between the two mixer shafts.
3. Good mixer dust removal and return air to ensure less adhesive on the mixing shaft.
(4) The main station adopts the advanced hinged structure of Europe, which is simple and generous, and the force point is clear---on the pin shaft, the installation is quick.
(5) Advanced control system, high reliability, simple operation and convenient maintenance.
1. Special sensor signal processing technology that suppresses common film interference, pulse interference technology and software composite filtering technology, which greatly improves the accuracy, stability and service life of the sensor;
2. Advanced software flow detection technology, each concrete improves precision in positive error, saves hard cost by 1 yuan, and saves dozens of tons of cement in one year.
3. Powerful black box operation log, which can record the correct and incorrect operation information of each operator in each window in real time for query.
4. Independent centralized computer control system, which is the national key project of the Ninth Five-Year Plan.
5. Advanced concrete slump control can effectively guarantee the quality of high performance concrete on site;
6. the operating system security is high: the use of one-click recovery technology, once the system fails, you can recover in a few minutes, and the data will not be lost. The original Taiwan Advantech IPC is used to ensure high reliability and high stability.
7. Multi threaded programming is used for signal acquisition, which improves the operating efficiency and stability of the control software. And has a powerful fault self-diagnosis and remote diagnostic technology.
(6) The application of new environmental protection technology strictly guarantees the national environmental protection requirements.
Contact Person: Karen